CamDisc SVR s/CamServer - Firmware Update

We strongly recommend the update of your CamDisc SVR s or CamServer with the latest firmware. You will benefit from bug fixes and all new features of the CamDisc SVR s series or CamServer.

Please note that only the latest receiver software CamControl LITE or CamControl PRO supports all new features of the latest firmware release (see SVR s firmware history).

You will find the download of the firmware at the end of this page! 

Latest SVR s Firmware

v1.92     2010-07-02

    (Support of all functions only with CamControl LITE 3.92 / CamControl PRO 3.92 or higher)

    • New Web Server (V1.24):
      • Adjustments for CamControl MV implemented
    • Correction of NTP function (network time protocol)
    • Configuration of tamper input possible (NC or NO)
    • Audio live transmission and audio recording optimised (mandatory CamControlLITE/CamControlPRO version 3.92 or higher)
    • Support of IP cameras optimised:
      • IP address (or symbolic address) of IP cameras, can now be extended with a port address
      • Maximum resolution of 2560 x 1800 pixels for integrated IP cameras
      • Optimisation of recording and transmission
      • Improved support for Sanyo model VCC HD4000 P
      • Alternative video format MJPEG (streaming mode) for integrated IP cameras from the following vendors: Axis, Basler, Dynacolor and IQeye
      • Integration of IP camera; Samsung SNB-5000, using the video format MJPEG
      • Optimisation of PTZ control for Messoa NDZ860H2
    • POS filter adjusted for Cyrillic characters  (Russian)
    • Extension and corrections to a couple of PTZ protocols
    • Honeywell PTZ protocol implemented (Software Remote Adapter only)
    • Camera position authentication for analogue cameras revised and optimised:
      • Evaluation and recording of up to two reference images per camera channel (e.g. day and night)
      • A combination of device firmware V1.92 or higher and CamControl LITE/CamControl PRO software V3.92 is mandatory for parameterisation of the optimised camera position authentication
    • Improved E-Mail function: No alarm image will be sent in the case of technical alarms (defective hard disk, reboot or video loss)
    • CamServer 1/3G only: New setup dialog Connections/Wireless WAN for parameterisation of the internal 3G/UMTS modem:
      • Character length for username and password extended from 20 to 38 characters

    Note

    Download the update.bin and place the file on your PC according to the installation guide in the subdirectory /DEVICEUPDATES of your CamControl LITE directory (CamControl LITE 3.64 or newer).
    The update.bin is only intended for CamDisc SVR s and CamServer devices! 

    Product information

    Produktinformation       Here you find the respective device.

Downloads

IconCamDisc SVR s/CamServer Firmware 1.92 (.bin)
Filesize: 3,9 MB

IconFirmware History for CamDisc SVR s/CamServer
Filesize: 102 KB

IconSVR s firmware update guide
Filesize: 498 KB

IconCustomer information to firmware 1.46 or higher
Filesize: 92 KB