CamTel SVR/CamDisc SVR/Cam4mobile - Firmware Update

We strongly recommend the update of your Cam4mobile, CamTel SVR or CamDisc SVR (CamDisc SVR: only devices up from serial no. "CV505002" and "CQ519004" ) with the latest firmware. You will benefit from bug fixes and all new features of the svr series.

Please note that only the latest receiver software CamControl LITE or CamControl PRO supports all new features of the latest svr firmware release (see svr firmware history).

You will find the download of the firmware at the end of this page!

Latest SVR Firmware

v1.92     2010-07-02

    (Support of all functions only with CamControl LITE 3.92 / CamControl PRO 3.92 or higher)

    • New Web Server (V1.24):
      • Adjustments for CamControl MV implemented
    • Correction of NTP function (network time protocol)
    • Configuration of tamper input possible (NC or NO)
    • Audio live transmission and audio recording optimised (mandatory CamControlLITE/CamControlPRO version 3.92 or higher)
    • Support of IP cameras optimised:
      • IP address (or symbolic address) of IP cameras, can now be extended with a port address
      • Maximum resolution of 2560 x 1800 pixels for integrated IP cameras
      • Optimisation of recording and transmission
      • Improved support for Sanyo model VCC HD4000 P
      • Alternative video format MJPEG (streaming mode) for integrated IP cameras from the following vendors: Axis, Basler, Dynacolor and IQeye
      • Integration of IP camera; Samsung SNB-5000, using the video format MJPEG
      • Optimisation of PTZ control for Messoa NDZ860H2
    • POS filter adjusted for Cyrillic characters  (Russian)
    • Extension and corrections to a couple of PTZ protocols
    • Camera position authentication for analogue cameras revised and optimised:
      • Evaluation and recording of up to two reference images per camera channel (e.g. day and night)
      • A combination of device firmware V1.92 or higher and CamControl LITE/CamControl PRO software V3.92 is mandatory for parameterisation of the optimised camera position authentication
    • Improved E-Mail function: No alarm image will be sent in the case of technical alarms (defective hard disk, reboot or video loss)
    • CamTel SVR only: Optimised control of recording pre-alarm image:
      Exclusive recording of analogue camera signals

Note

Download the update.bin and place the file on your PC according to the installation guide in the subdirectory /DEVICEUPDATES of your CamControl LITE directory (CamControl LITE 3.64 or newer).
The update.bin is only intended for the SVR series and Cam4mobile!

Product information

Produktinformation       Here you find the respective device.

Downloads

IconCamDisc SVR/CamTel SVR/Cam4mobile Firmware 1.92 (.bin)
Filesize: 3,9 MB

IconFirmware History for CamDisc SVR, CamTel SVR and Cam4mobile
Filesize: 125 KB

IconSVR firmware update guide
Filesize: 498 KB

IconCustomer information to firmware 1.46 or higher
Filesize: 92 KB